Virtual Thermal Printer

Print receipts from POS applications that support ESC/POS printing over IP. Just power on the printer and configure the IP-address and port displayed in your POS application.

List of supported commands:

- ESC @: Initialize printer

- LF: Print and line feed

- GS !: Double-width and double-height

- ESC E: Turn emphasized mode on/off

- ESC -: Turn underline mode on/off

- ESC a: Align text (left, right and center)

- ESC i and ESC m: Partial cut

- GS B: Turn white/black reverse print mode on/off

- GS V: Cut paper (

- GS k: Print barcode (EAN8, EAN13, Code39)

- GS ( k: Print QR Code. Functions 169 & 180

- DLE EOT: Printer status (1..4)

- GS v 0: Print raster bit image

For more details on ESC/POS commands see https://reference.epson-biz.com/modules/ref_escpos/index.php?content_id=2

The following code-pages are supported:

- CP437: US ASCII

- CP850: Latin I

- CP852: Latin II

- CP858: Latin I + Euro

- CP860: Portugese

- CP863: Canadian-French

- CP865: Nordic

- CP866: Russian

Note: The content printed in the above screenshots is for illustrative purposes only. Depending on the POS system used, the output may vary. Please make sure your POS application supports ESC/POS commands before installing this application.