Original System 2.0

System 2.0 is the official operator app for the Original System 2.0 two-tower wakeboard cable system by Machwerk (formerly Sesitec System 2.0).

Connect directly to your cable's PLC over the local WiFi network and take full control of the system from your iPhone.

Features:

- Real-time view of cable position, speed, operating hours, and system status. Designed for at-a-glance monitoring from anywhere in the park.

- Switch instantly between configured rider programs. The active program is highlighted clearly so you always know what's running.

- Tune the six configurable points along the cable path. Edit forward and backward positions with PLC-side validation to prevent invalid configurations.

- Adjust speeds and acceleration ramp times per program. Changes are staged locally and applied atomically when you confirm — no half-applied settings.

- All edits are previewed before they reach the machine. Review your changes, then Apply with a single tap — or Discard to revert. The PLC enforces a two-second commit window so accidental writes can't corrupt your setup.

- Toggle mirrored operation for double-sided park layouts.

- The app automatically detects when you're connected to the System 2.0 network and guides you through joining it if you're not. A visual indicator shows your connection status at all times.

- Full localization in English, German, and French.

- An always-available debug overlay captures connection issues, Modbus errors, and validation failures with full technical detail — invaluable for support calls and field troubleshooting.