Jetting for Rotax Max EVO Kart

This app provides, using weather conditions and your engine configuration, a recommendation about jetting and spark plug to use for karts with Rotax Max EVO (Senior, Minimax, Micromax, Supermax, DD2 or Junior), which use a Dellorto VHSB 34 XS carb. The Senior MAX Masters and DD2 Masters categories run the same engine as Senior and DD2, so they are set up in exactly the same way.

In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.

The application is made up of four tabs that are described next:

- Results: in this tab, the recommended main jet, needle position, air density and spark plug type values are shown. This data are calculated depending on the weather conditions and the engine configuration given in the next tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.

- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest public weather station (from the GPS tab).

- Engine: you can set in this screen the information about your engine, carburator and track, that is, the engine type (Micromax, Minimax, Senior, Supermax, Junior or DD2), the model year of the engine, the spark plug brand used, the needle type, the float/pilot jet combo, the floats height, venturi, oil mix ratio, airbox type (new or old model) and the track type.

- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.

Up to date for the current season: the engine model year now runs up to the present year, and the app follows the Global RMC Technical Regulation specification, which keeps the Dell'Orto VHSB 34 XS carburettor, the K57 needle, the 4.0 gr floats and the DP267 needle jet. The whole 125 MAX EVO range has been CIK-FIA approved since the 2024 season.

Privacy: the app uses no trackers and collects no personal data. If you use the GPS, your coordinates are sent only to look up the nearest weather station.

The app is NOT VALID for Rotax Max engines before 2015. For these engines, you should install Jetting Max Kart.